Operator`s manual

3500 VRC Operator’s Manual
59
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
Operation
(1) ON / OFF Press once to turn on. Twice to turn off.
(2) MODE Activates/deactivates guidance mode.
(3) RUN / HOLD Starts/stops product metering, record accumulation, alarms and data
logging.
(4) RECORDS Selects active “TRIP” and displays overall totals, weight/volume applied
and area covered for each product.
(5) RESET Used to zero records or various calibration factors.
(6) ALARM Cancels low priority warnings and scrolls through alarm messages.
(7) CAL Provides access to calibration and set up menus.
(8) arrows Used to move the cursor, change settings and increase/decrease
calibration values. ?and ? keys adjust the contrast in the main
screen.
(9) bottom softkeys Allow selection of bottom screen functions.
(10) left softkeys Allow selection of left hand side screen functions.