Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Step 11

11. 1 Flexi Steer (Autosteer)

11.1.1 Hydraulic Disable

Install the Hydraulic steering valve and hoses as per the documentation that was included in the kit.

1. Press the CAL button (6)

2. Select the Autosteer menu and press CAL (6)

3. The following screen will appear

4. The HYD Value should be “ON”. When you are moving the steering wheel it should change

to “OFF”, when you stop it should change back to “ON”

5. If the HYD value is “OFF” when not moving the wheel screw the pressure switch adjusting

screw clockwise until it changes to “ON and retry point 4

6. If the value is “ON” and does not change to “OFF” when you move the wheel, adjust the

pressure switch adjusting screw anti-clockwise and retry point 4.