Manualshelf

Operator`s manual

ManualsBrandsSimplicity ManualsLawn Mower3000
51525354555657585960
3500 VRC Operator’s Manual
54
V5.00.26
October
2006
Revision M
Part No. : AM
-
Updated : 12/10/2006
10.3 - GPS to Implement
The distance between the GPS antenna and the bar. For example, if the GPS antenna is mounted
on the tractor and the bar is 15m away, enter 15m.
Enter GPS to Implement Distance
1. Press the softkey pointing at “GPS TO IMPLEMENT”.
2. Use the arrow keys to enter the GPS to bar distance.
10.4 - Headland Hold
The hold state can be automatically engaged when a headland area is entered. To enable this set
“HEADLAND HOLD” to “ON”. To disable set to “OFF”.
Note
A boundary must first be set before the headland hold function will work.
10.4.1 - Enable/Disable
1. Press the softkey pointing to “HEADLAND HOLD”.
2. Use the up and down arrow keys to turn headland hold on/off.
10.5 - Nudge
Compensates for errors in GPS position that may occur when guidance was stopped and resumed
after a long period.
10.5.1 – Using the Nudge Function
A swath is left half finished and on the next day the operator resumes work. The operator finds the
same unfinished swath and follows the same tyre tracks observing a cross track error.
1. Press “CAL” to display the calibration menu.
2. Use the arrow keys to highlight “GUIDANCE”.
3. Press the “CAL” key. The “GUIDANCE SETUP” menu is displayed. See below.