Operator`s manual

3500 VRC Operator’s Manual
52
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
9.4.2 – Viewing Maps
5. In the “DATA CAD” screen press the bottom "SHOW" softkey. The application map for all four
bins will be drawn. Only rates greater than zero are drawn black. See below.
A white flashing dot is your current position on the map. If you are outside the map the message
"OUTSIDE OF MAP" will appear at the top of the screen.