Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

9.4 – Application Maps

Application maps for auto control are uploaded into the canlink from the data card menu. See the

“AUTO CONTROL” section of this manual for more instructions.

Note

Only one application map can be uploaded into the canlink at a time.

9.4.1 – Upload Application Map

1. Press the softkey pointing at "LIST MAP FILES". Use the up and down arrow keys to scroll

through all maps on the card.

Note

?? See the “Data Card Operation” section of this manual for more information on map naming

and the recommended number of maps to store on a card.

2. With the correct map highlighted, press the "LOAD" softkey at the bottom of the screen. The

highlighted map will be uploaded. Once uploaded the map name will be displayed under

“CURRENT MAP”.