Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Using this manual

The following manual is a detailed document, which covers all, drives and applications used by the 3500VRC/MON

software. This manual covers all airseeder/spreader/combine drill types that are sold with the 3500VRC/MON. On the

bottom of each page you will find the version of software that was released at the time the manual was printed. Please

quote this software version number when you consult your Farmscan dealer or Farmscan service personnel.

Each 3500VRC/MON monitor has a communications pod, which is found on the airseeder/spreader/combine. This too

has a software version and can be found on the 3500 monitor (see SETUP menu).

For your convenience there is a table below that has been created for you to keep records of your latest software

version. Like any electronic equipment the 3500VRC/MON software will have new features and improvements added in

due course. So when your 3500 is upgraded, please send the manual in with it and our service department will update

the table below.

Version of Software (Monitor) Version of Software (Pod) Date of Release/Upgrade

V5.00.26 V5.00.26 October 2006