Operator`s manual

3500 VRC Operator’s Manual

V5.00.26

October

2006

Revision M

Part No. : AM

3500V/M/SIMV5

Updated : 12/10/2006

Step 7

7.1 - Display Setup

The display menu provides control over contrast, backlighting brightness, display inversion and

lightbar brightness.

1. Press the “CAL” key to display the calibration menu.

2. Use the arrow keys to highlight “DISPLAY”

3. Press the “CAL” key to enter the “DISPLAY” menu.

7.2 - Contrast

Display contrast is automatically adjusted for variations in temperature. Contrast can be manually

adjusted by increasing or decreasing the contrast setting number.

7.2.1 - Adjust contrast

1. Press the softkey pointing at “CONTRAST”.

2. Use the arrow keys to increase/decrease the contrast setting number until suitable.

Note

?? While operating use the front panel left/right arrow keys to decrease/increase the contrast.

?? The display may not be suitable for viewing with polaroid sunglasses.

?? The display may appear black if switching the unit on after a significant change in temperature

eg night to day. Use the left and right arrow keys to adjust.