Operator`s manual

3500 VRC Operator’s Manual
27
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
Step 4
4.1 - Machine Calibration
Enter calibration factors to calculate area (width factor) and speed (wheel factor).
1. Press “CAL” key. Calibration menu appears.
2. Highlight “MACHINE” and press “CAL”. “MACHINE MENU” appears, see above.
4.1.1 - Width Factor
1. Press the softkey pointing at “WIDTH FACTOR”.
2. Use the up and down arrow keys to enter the width of airseeder cultivator bar measured from
tyne to tyne.