Operator`s manual

3500 VRC Operator’s Manual
26
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
3.4 - Reusing Product Calibration Factors
Product calibration factors for each bin are saved in the active trip. To re-use the same calibration
factors simply activate this trip.
When another trip is activated previous product selections and product calibration factors will be
absent. However, bin drive setups will still be there.
Clearing a trip will delete all saved records, product selections and calibration factors.
Product calibration factors and drive setups can be copied and pasted into other trips. See
“Records” in the operation section of the manual.