Operator`s manual

3500 VRC Operator’s Manual
23
V5.00.26
October
2006
Revision M
Part No. : AM
-
3500V/M/SIMV5
Updated : 12/10/2006
3.2 – Target Rate and Step Size
The target rate and step size for each bin is set in the rates screen. Follow the instructions below.
The target rate is the rate in kg/ha that the bin once turned on will automatically control to. This
rate can be increased/decreased in the main screen using the up and down arrows keys. The
amount by which the target rate is increased/decreased is the step size value and is set in the rates
screen.
3.2.1 - Set Target Rate
1. In the rate screen shown above, press the softkey pointing at “RATE”.
2. Use the arrow keys to enter the rate.
3.2.2 - Set Step Size
1. Press the softkey pointing at “STEPS” until the right most digit of the step value is highlighted.
2. Use the arrow keys to enter the step size value.