Manualshelf

Operator`s manual

ManualsBrandsSimplicity ManualsLawn Mower3000
21222324252627282930
3500 VRC Operator’s Manual
22
V5.00.26
October
2006
Revision M
Part No. : AM
-
Updated : 12/10/2006
Monitor
1. Check “PRODUCT CALIBRATION” screen is displayed. See below.
2. Press the bottom “READY” softkey.
3. Be ready at the airseeder metering unit to catch product.
4. Press green button on the pod to engage the clutch of that particular bin (if fitted) and turn
the crank handle to turn the drive.
5. The metering unit will commence to turn and the 3500 will count “TEST PULSES”. Stop
turning after a reasonable size sample is metered.
6. Accurately weigh the product.
7. Press the softkey pointing at “TEST WEIGHT”. Use the arrow keys to enter the weight of
product caught.
8. Press the bottom “UPDATE” softkey. A new “PULSE/KG” factor will be calculated.
9. If the metering system was not initially primed then the above procedure will need to be
done again.