Specifications

1.7a Chain enclosure is secured by
three bolts at the rear on BR-E/F and
BR-J models ...
1.7b ... and by two bolts at the rear on 1.7c Note later type of flasher unit
BR-K model
1.7d Headlamp bulb removal -
procedure is similar to earlier models
1.7e ... ensure bulb locating tangs 1.7f Pilot lamp bulbholder is a press fit
engage with matching slots in holder in reflector ...
1.7g ... bulb is of bayonet type - always 2.1 Modified battery retaining strap -
ensure correct wattage bulb is fitted note spare fuse location (arrow) on BR-
K model
4.2 Air filter cover is retained by six
screws - note sealing gasket
4.3 Note two flame traps - one is fitted 4.4a Withdraw element assembly ...
next to filter element
4.4b ... and remove single retaining
screw to dismantle