Specifications

234
It is finally time try it out. If you have typed everything correctly, then you should be able to load the model
and expand the Operations Tree in the left hand side of the Main Frame to this:
Make sure you have a Model View window open. Select ParameterStudy as indicated and hit the "Run"
button. You should see the model starting to cycle, and if you watch the vicinity of the saddle carefully, you
will see that the hip joint is changing its position on a 5 x 5 grid. With a reasonably fast computer it should
take a minute or less to do the 25 analyses after which the computations stop. Congratulations! You have
completed your first parameter study. Let us investigate the result.
The obvious way to visualize the results of a study with two parameters is as a 3-D surface. AnyBody has a
window to make that type of plots. Please click Window -> AnyChart 2D/3D (new). A new window containing
a coordinate system and the usual model tree appears: