Specifications

REF. CONTROL/INDICATOR FUNCTION
1 VOLTAGE multimeter Indicates voltages at points selected by the Multimeter Switch (Ref. 11).
2 SUPPLY CURRENT meter Indicates the 230V supply current being supplied to the Power Amplifier.
3 POWER meter Indicates either FORWARD or REFLECTED power at the transmitter
output, whichever is selected by the POWER METER selector switch (Ref.
4).
4 POWER, selector Selects Forward power output or Reflected power, to be read on the POWER
meter.
5 OFF, pushbutton Used to turn the transmitter off.
6 LOWER, pushbutton Used to adjust power level. When the transmitter is in the LOW, MEDIUM,
or HIGH power mode, depress to LOWER power output and hold until
desired power is reached. INDICATOR illuminates while power is being
lowered.
7 RAISE, pushbutton Used to adjust power level. When the transmitter is in the LOW, MEDIUM,
or HIGH power mode, depress to RAISE power output and hold until
desired power is reached. INDICATOR illuminates while power is being
raised.
8 HIGH, pushbutton Used to turn the transmitter on at the preset HIGH power level, or to change
power to the preset HIGH power level. The pushbutton will illuminate when
in the HIGH power mode.
9 MEDIUM, pushbutton Used to turn the transmitter on at the preset MEDIUM power level, or to
change power to the preset MEDIUM power level. The pushbutton will
illuminate when in the MEDIUM power mode.
10 LOW, pushbutton Used to turn the transmitter on at the preset LOW power level, or to change
power to the preset LOW power level. The pushbutton will illuminate when
in the LOW power mode.
11 MULTIMETER switch Selects the desired function to be monitored by the VOLTAGE multimeter.
Table 3-2
Switchboard/Meter Panel Controls and Indicators
888-2339-002 3A-5
WARNING: Disconnect primary power prior to servicing.