Specifications

3-18 888-2500-001 5/2/2013
WARNING: Disconnect primary power prior to servicing.
DAX-1/DAX-3
Section 3 Operation
(H) Primary PA (DAX-1R only): Allows switching of on-air PA module. ‘A’ selects
bottom PA as primary, ‘B’ selects top PA as primary.
NOTE:
The actual switching of PAs does not take place until the DAX transmitter is
restarted, which can simply be pushing the ON button while the transmitter is
running.
3.5.3.2 Power Settings
(1) Level 1: Pressing ‘1’ changes the transmitter power setting to Level 1.
(2) Level 2: Pressing ‘2’ changes the transmitter power setting to Level 2.
(3) Level 3: Pressing ‘3’ changes the transmitter power setting to Level 3.
(4) Level 4: Pressing ‘4’ changes the transmitter power setting to Level 4.
(5) Level 5: Pressing ‘5’ changes the transmitter power setting to Level 5.
NOTE:
To set the Power Level range see "6.2.2.4 VT100 - Page 4" on page 6-12
3.5.3.3 Status
On/Off: Indicates status of transmitter for remote. Display is either ON or OFF.
Forward Power: Indicates transmitter output power.
Reflected Pwr: Indicates transmitter reflected power.
Mute: When ACTIVE is displayed, indicates the output power of the transmitter has
been muted. INACTIVE indicates normal operation.
Fault: When ACTIVE, indicates a fault present on the transmitter.
Foldback: When ACTIVE, indicates the transmitter has lowered output power due to
high reflected power. INACTIVE is normal operation.
Interlock: When ACTIVE, indicates either a PA interlock or external interlock
condition is present. INACTIVE is normal operation.
Power Level: Indicates the Power Level selected. Displays 1, 2, 3, 4, or 5.