Specifications

5/2/2013 888-2500-001 3-17
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
DAX-1/DAX-3
3.5.3 VT100 - Page 2
Figure 3-13
VT100 Page 2 View
3.5.3.1 Remote Control
NOTE:
All remote functions with the exception of (B) Off and (E) Mute are ignored
when the transmitter user interface Remote Enable is OFF.
(A) On: Pressing ‘A’ will turn the transmitter ON.
(B) Off: Pressing ‘B’ will turn the transmitter OFF.
(C) Raise: Pressing ‘C’ will raise the output power of the transmitter.
(D) Lower: Pressing ‘D’ will lower the output power of the transmitter.
(E) Mute: Pressing ‘E’ will mute the transmitter.
(F) Toggle Audio Mode: Pressing ‘F’ will change the audio input mode selection from
ANALOG to DIGITAL and vise versa.
(G) Fault Reset: Pressing ‘G’ will reset any faults present in the transmitter.