Specifications

3-4 888-2500-001 5/2/2013
WARNING: Disconnect primary power prior to servicing.
DAX-1/DAX-3
Section 3 Operation
Figure 3-2 Main (default) Screen
3.3.3 Common Control Selections & Routine Metering
This section covers the most common uses of the GUI.
The following symbols for the DAX transmitter GUI screen apply throughout all levels
of menus.
 - More parameters available by pressing the UP button only
 - More parameters available by pressing the DOWN button only
 - Current Selection: More parameters available by pressing either the UP or DOWN
buttons
 - Selection: More parameters available within this function upon ENTER press
3.3.3.1 Adjusting GUI Display Contrast
To adjust the contrast of the GUI display to compensate for viewing angle or ambient
light conditions, follow the procedure below.
STEP 1 Press the INFO button to navigate to the submenu screen
STEP 2 Select SETUP SUBMENU using the UP or DOWN buttons
STEP 3 Press ENTER to bring up below screen
Figure 3-3 Setup Screen
NOTE: DAX-1R (Redundant PA option) Screen Shown
STEP 4 Scroll to CONTRAST and press ENTER
STEP 5 Adjust the display to desired contrast
STEP 6 Press ENTER to store that value