Specifications

3. ASSEMBLY WHEATHEART - SELF-PROPELLED AUGER KIT
3.16. CUSHION VALVE INSTALLATION WHEATHEART & COMPETITOR MODELS
38 IM3 R2
3.16. CUSHION VALVE INSTALLATION
Connect the hoses as shown in Figure 3.21 and 3.22, ensuring that the hoses
are not crossed. Connect the lower cushion block hoses to the lower ports on
each hydraulic motor as shown.
Figure 3.21 Cushion Block Installation
Figure 3.22 Cushion Block Installation Schematic
NOTICE
Do not over-tighten fittings! Over-tightening
hose fittings can crack the fittings or motor
body and will void the warranty.
adjustable needle lever?