Specifications

3. ASSEMBLY WHEATHEART - SELF-PROPELLED AUGER KIT
3.13. HOSE KIT LAYOUT—NO BIN SWEEP WHEATHEART & COMPETITOR MODELS
28 IM3 R2
3. Wrap cable 1-1/2 times around the cable attach rod and secure with two
1/4” cable clamps. Position cable clamps as shown (Figure 3.14). Tighten
cable clamps securely.
4. Rotate drum until cable is taut. Ensure drum is rotating in direction shown in
Figure 3.13 when raising auger.
5. Tie up winch motor hydraulic hose as needed to prevent damage to the hose.
6. Check gearbox for oil—make certain it is half full.
Figure 3.14
3.13. HOSE KIT LAYOUT—NO BIN SWEEP
Refer to Table 3.4, and Figure 3.15 and 3.16.
SP TRANSPORT INCLUDES:
• hoses (A, B, C, D, F1, F2, G1, G2, I1, I2, J1, J2), winch valve, winch
hoses (H1, H2)