Specifications

WHEATHEART - SELF-PROPELLED AUGER KIT 3. ASSEMBLY
WHEATHEART & COMPETITOR MODELS 3.7. OVER-CENTER DRIVE ASSEMBLY—WHEATHEART BH AUGERS
IM3 R2 21
3.7. OVER-CENTER DRIVE ASSEMBLY—WHEATHEART
BH AUGERS
1. Once the wheel is bolted to the hub, the over-center drive assembly can be
installed.
2. Position the axle cap of the over-center drive assembly squarely on the axle
tube as shown in Figure 3.6.
3. With the pinion gear flush with the ring gear (Figure 3.5), bolt the axle cap to
the axle tube.
Figure 3.8