Specifications

3. ASSEMBLY WHEATHEART - SELF-PROPELLED AUGER KIT
3.2. PUMP GUARD ASSEMBLY WHEATHEART & COMPETITOR MODELS
16 IM3 R2
Figure 3.1 Gear Pump Installation Guard
3.2. PUMP GUARD ASSEMBLY
1. Bolt the pump guard bracket to the over-center pump bracket (Figure 3.1).
• Install the pump guard bracket at the pump end of the long, adjustable
slot, through the middle of the over-center bracket.
• Place 2 washers between the pump guard bracket, and the over-center
bracket so that the angle of the bracket may be adjusted to the belt.
2. Attach the pump guard to the pump guard bracket.
• Align the pump guard with the belt that runs between the pump and the
engine.
• Ensure that the belt does not contact the pump guard with belt engaged
and disengaged.
3.3. OIL RESERVOIR ASSEMBLY
1. Bolt the double tank mount brackets to the frame with 3/8” x 2-5/8” u-bolts
and 3/8” nylock nuts (Figure 3.2).
2. Secure the 22L oil reservoir to the tank mount brackets using the 32” clamps
provided. The optional 43 L oil reservoir is attached to the double tank mount
brackets using two 25” gear clamps joined together.