Specifications

164015-YIM-A-0905
Unitary Products Group 11
Units may be moved or lifted with a forklift. Slotted openings in
the base rails are provided for this purpose.
LENGTH OF FORKS MUST BE A MINIMUM OF 60 INCHES.
Figure 5: Unit 4 Point Load Weight
Figure 6: Unit 6 Point Load Weight
Figure 7: Center of Gravity
Before lifting, make sure the unit weight is distributed
equally on the rigging cables so it will lift evenly.
All panels must be secured in place when the unit is
lifted.
The condenser coils should be protected from rigging
cable damage with plywood or other suitable material.
D
A
CB
LEFT
FRONT
D
A
C
B
E
F
LEFT
FRONT
X
Y
LEFT
FRONT
Table 2: Weights and Dimensions
Size
(Tons)
Model
Weight (lbs.) Center of Gravity 4 Point Load Location (lbs.) 6 Point Load Location (lbs.)
ShippingOperatingX Y ABCDABCDEF
078
(6.5)
ZH 905 900 38 23 201 150 234 315 141 115 95 149 180 221
090
(7.5)
ZH 925 920 38 23 206 153 240 322 144 117 97 152 184 225
102
(8.5)
ZH 1140 1135 38 25.5 281 209 275 369 197 160 133 175 211 259
120
(10)
ZH 1140 1135 38 25.5 281 209 275 369 197 160 133 175 211 259
150
(12.5)
ZH 1405 1400 51 25.5 258 347 456 339 164 198 243 319 260 216