Installation Guide

Care & Instructions
Simplicity by STRASSER WOODENWORKS with China Tops
www.simplicitybystrasser.com [phone] Crafted in USA to Last a Lifetime
- 4 -
Removing and Re-installing Drawers
To remove a drawer, simply open completely while
lifting the drawer box to disengage the drawer box from
the cabinet.
To re-install, align the nylon wheels and drawer guides
and insert the drawer.
Adjusting Drawer Face Alignment
To adjust drawer face alignment
loosen the two drawer face adjusting
screws inside the drawer box slightly and
move the face to the desired position.
Once you are satisfied, tighten all of
these screws on all drawers.
Then, screw the provided set screws
into the small holes beneath the adjusting
screws to secure the faces to the drawer
boxes.
Drawer Face
Adjusting Screws
Set Screw Holes
by STRASSER WOODENWORKS