Instructions / Assembly

- 2 -
Care & Instructions
Simplicityby STRASSER WOODENWORKS Medicine Cabinets
by STRASSER WOODENWORKS
www.strasserwood.com [phone] Good Quality. Good Price. U.S. Made.
To change
the door swing from
left-opening to
right-opening
or vice versa,
simple rotate the
cabinet body
180 degrees and
hang on your wall.
Changing Medicine Cabinet Door Swing
3½"
Figure 2.
3. Measure down 3½" and make a level horizontal
line. The top edge of the Wall Mounting Bar will be
at this line. See Figure 2.
4. Locate wall studs. Use two to four large (min. 3")
screws to secure Wall Mounting Bar to the wall.
Pre-drill screw holes in the bar slightly larger than
the screws being used. Run screws through bar,
sheetrock and well into studs. If you are not familiar
with types of screws, load, or how to do this for
your specific application; ask at a home center.
Do not bend the Wall Mounting Bar even if wall is
curved. Use shim(s) where necessary.
5. Place Medicine Cabinet against the wall and slide
down until the Medicine Cabinet Mounting Bar
mates with the Wall Mounting Bar.