Instruction Manual STEAM MOP If you have any questions or comments, please call us toll free: (800) 821-6786 Page 1 of 8
Safety instructions WARNING:Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Warning: When using electrical appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. ●Read all of this manual carefully before using the appliance. ●The intended use is described in this manual.
Safety of others: ●This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety. ●Children should be supervised to ensure that they do not play with the appliance. SAFETY GUIDELINES-DEFINITIONS It is important for you to read and understand this manual.
Product Components 1 2 3 4 5 6 7 Handle Cord Holder Hand Bar Power Switch Power Cord Water Tank Filler Steam Head Spindle Function and Specification Function Detachable handle; Continuous steam output (up to 5 minutes continuously working, steam averaged): About 23g/min Steam output time:About 15 minutes Red and blue light, warm-up and work instructions Pressure relief protection, keeping the pressure in the heating unit constant Specification Rated voltage:120V Rated frequency: 60Hz Ou
Attaching the steam head ● Slide the bottom end of main body into the steam head until steam head spindle, clicks into place; ● The steam head can be removed from the main body by pressing button on the steam head spindle Attaching a cleaning pad Place a micro-fiber cleaning pad to steam head, until secure Attaching carpet gilder Press the micro-fiber cleaning pad E with main body to carpet gilder by vertical pressure, until it snaps in to place Place the front of your shoes onto the cleaning pad E
2. Plug in the appliance to a grounded outlet 3. Press the power switch, the indicator lights will turn red, it indicates preheating. If the lights do not illuminate, please check the "troubleshooting" section for more details 4.
WARNING Don't leave the appliance unattended during the lime scale removal process. NOTICE: Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that there is no debris left in the system. This product contains no serviceable parts. Do not try to repair it by yourself. Any servicing that requires disassembly other than cleaning must be performed by a qualified appliance repair technician. ALL servicing should be done by an authorized service representative.
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION Reduced steam or no steam Water tank may be empty Fill water into the water tank Steam nozzle may be blocked Clean steam nozzle There is no power to the unit Make sure unit is plugged in Didn't press power button Press power button Blown fuse or breaker Replace fuse or reset breaker in home Power cord not plugged in Plug cord into a working circuit Internal fuse is blown Contact with customer service Unit will not turn on Special remarks: Material