SIMP IHOME I L I F E B Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON CONSOLE TABLE MODEL # AXWSH007-GR 1/17
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
MODEL # AXWSH007-GR PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION BL A BR nt / Fro TOP QTY 1 C nt Ava Fron t/A van t LEFT SIDE QTY 1 D RIGHT SIDE QTY 1 E Fron t/ Avan t Fro nt / Ava nt Fro nt / Ava nt Fron t/A van t DIVIDER QTY 1 F TOP SHEL QTY 1 G BOTTOM FRAME QTY 1 MIDDLE FRAME QTY 1 H BACK QTY 1 DRAWER FRONT QTY 4 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH007-GR PARTS DESCRIPTION IL J IR LEFT DRAWER SIDE QTY 4 RIGHT DRAWER SIDE QTY 4 DRAWER BACK QTY 4 K DRAWER BOTTOM QTY 4 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH007-GR HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 36 4 3 CAM LOCK PIN CAM LOCK QTY 22 SETS WOOD DOWEL Ø8 X 30 mm QTY 12 5 ALLEN KEY QTY 1 HANDLE M4 X 25 mm QTY 4 SETS Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
COMPONENTS – KEY DIAGRAM MODEL # AXWSH007-GR Fron t/A vant Fron t/A vant BR Fro nt / Ava n t BL Fron t/A vant Fron t/A vant IR IL 8/17
ASSEMBLY MODEL # AXWSH007-GR STEP 1 IR IL 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front H . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides IL , IR . 3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side IL , IR . 4. Use flathead screwdriver secure Cam Locks. STEP 2 IR IL 1. Slide Drawer Bottom K firmly into slots on Drawer Sides IL , IR and Drawer Front H .
ASSEMBLY MODEL # AXWSH007-GR STEP 3 IR IL 1. Align Drawer Back J with Drawer Bottom K and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side IL , IR . 3. Use Allen Key 4 to tighten screws. Do not over-tighten. STEP 4 NOTE: The screwdriver is not included in the hardware pack. 1. Use Phillips Screwdriver to attach Handle 5 to Drawer Front H . Repeat Step 1-4 for the other three drawers.
ASSEMBLY MODEL # AXWSH007-GR STEP 5 nt Fro / nt Fro t van A / nt Ava / nt Fro / nt Fro nt / Fro Note: Holes are on the right side nt Ava nt Ava nt Ava BL nt Fro ant / Av 1. Insert 2 Wood Dowels 3 into Middle Frame E . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of dowels should be exposed. 3. Attach Middle Frame E by inserting exposed dowel ends into matching pre-drilled holes on Left Side BL . 4.
ASSEMBLY MODEL # AXWSH007-GR STEP 6 nt / Fro / nt Fro nt Ava nt Ava BL nt / Fro nt Ava 1. Attach Divider C to Top Shelf D and Middle Frame E using 5 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH007-GR STEP 7 nt / Fro / nt Fro nt Ava nt Ava BL nt / Fro nt Ava 1. Insert 2 Wood Dowels 3 into Back Panel G . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of dowels should be exposed. 3. Attach Back Panel G by inserting exposed dowel ends into matching pre-drilled holes on Left Side BL .
ASSEMBLY MODEL # AXWSH007-GR STEP 8 BR nt / Fro nt / Fro / nt Fro BL nt Ava nt Ava nt Ava nt / Fro nt Ava 1. Repeat Step-5 & Step-7 for the Right Side BR .
ASSEMBLY MODEL # AXWSH007-GR STEP 9 Fron t/A van t Fron t/A van t Fron t/A van t Fron t/A van t BL BR 1. Attach Bottom Frame F to Sides BL , BR and Divider C using 9 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH007-GR STEP 10 Front / Avant Front / Avant Front / Avant Front / Avant BR BL 1. Insert 2 Dowels 3 into top corners of each Side BL , BR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 to bottom of Top A . 4. Align pre-drilled holes bottom corners of Top A with Dowels 3 in Sides BL , BR . 5. Align and insert Cam Lock Pins on Top A into pre-drilled holes on Sides BL , BR . 6.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
