WARM SHAKER / NORFOLK / LEXINGTON CONSOLE TABLE MODEL # AXWSH007-GR 1/17
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
ENTER TO WIN Upload an image of our furniture in your home with a short review to our facebook page for a chance to Win up to $3000 of Simpli Home furniture!!! www.facebook.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
MODEL # AXWSH007-GR PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A B C Ba ck Sid e Ba ck Sid e Fro nt Sid e TOP QTY 1 D Fro nt Sid e SIDE QTY 1 PAIR DIVIDER QTY 1 E F Fron t Si de Fro nt S ide TOP SHEL QTY 1 G MIDDLE FRAME QTY 1 H J I DRAWER FRONT QTY 4 BACK QTY 1 BOTTOM FRAME QTY 1 DRAWER SIDE QTY 4 PAIRS K DRAWER BACK QTY 4 DRAWER BOTTOM QTY 4 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH007-GR HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 36 4 3 CAM LOCK PIN CAM LOCK QTY 22 SETS WOOD DOWEL Ø8 X 30 mm QTY 12 5 ALLEN KEY QTY 1 HANDLE QTY 4 SETS Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
COMPONENTS – KEY DIAGRAM MODEL # AXWSH007-GR Fro nt S id e 7/17
ASSEMBLY MODEL # AXWSH007-GR STEP 1 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front H . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides I . 3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side I . 4. Use flathead screwdriver secure Cam Locks. STEP 2 1. Slide Drawer Bottom K firmly into slots on Drawer Sides I and Drawer Front H .
ASSEMBLY MODEL # AXWSH007-GR STEP 3 1. Align Drawer Back J with Drawer Bottom K and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side I . 3. Use Allen Key 4 to tighten screws. Do not over-tighten. STEP 4 NOTE: The screwdriver is not included in the hardware pack. 1. Use Phillips Screwdriver to attach Handle 5 to Drawer Front H . Repeat Step 1-4 for the other three drawers.
ASSEMBLY MODEL # AXWSH007-GR STEP 5 e Sid t ron F Note: Holes are on the right side ide S nt Fro 1. Insert 2 Wood Dowels 3 into Middle Frame E . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of dowels should be exposed. 3. Attach Middle Frame E by inserting exposed dowel ends into matching pre-drilled holes on Side B . 4. Attach Top Shelf D to Side A using 3 Allen Key Screws 1 . 5. Use Allen Key 4 to snugly tighten. Do not over-tighten.
ASSEMBLY MODEL # AXWSH007-GR STEP 6 1. Attach Divider C to Top Shelf D and Middle Frame E using 5 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH007-GR STEP 7 1. Insert 2 Wood Dowels 3 into Back Panel G . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of dowels should be exposed. 3. Attach Back Panel G by inserting exposed dowel ends into matching pre-drilled holes on Side B .
ASSEMBLY MODEL # AXWSH007-GR STEP 8 1. Repeat Step-5 & Step-7 for the second Side B .
ASSEMBLY MODEL # AXWSH007-GR STEP 9 1. Attach Bottom Frame F to Sides B and Divider C using 9 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH007-GR STEP 10 1. Insert 2 Dowels 3 into top corners of each Side B . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 to bottom of Top A . 4. Align pre-drilled holes bottom corners of Top A with Dowels 3 in Sides B . 5. Align and insert Cam Lock Pins on Top A into pre-drilled holes on Sides B . 6. Insert 3 Cam Locks 2 into pre-drilled holes on each Side B . 7.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
Question, problems, missing parts? Before returning your product please email Customer Support at simpli-home.com/customer-support or call Customer Support at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.
