TM SIMP HOME ® LIFE BY DESIG N TM ACADIAN / NORMANDY / BRUNSWICK 8 CUBE STORAGE / SOFA TABLE MODEL # AXWELL3-014GR 1/16
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION A Fron MODEL # AXWELL3-014GR BL BR t/A van t TOP QTY 1 D TOP DIVIDER (L&R Same) QTY 3 F RIGHT SIDE QTY 1 BOTTOM DIVIDER (L&R Same) QTY 3 TOP SHELF QTY 1 HL van t BOTTOM SHELF QTY 1 HR vant E G t/A t/A LEFT SIDE QTY 1 C Fron Fron t van t/A Fron Warning Label RIGHT BACK PANEL QTY 1 BOTTOM SUPPORT LEG QTY 1 LEFT BACK PANEL QTY 1 H MIDDLE BACK PANEL (L&R Same) QTY 2 NEED HELP? For help with assembly or if you are missing a part, Pleas
PRE-ASSEMBLY INFORMATION MODEL # AXWELL3-014GR HARDWARE DESCRIPTION 1 2 CAM LOCK PIN CAM LOCK QTY 18 SETS ALLEN KEY SCREW M6 X 30mm QTY 27 4 3 5 ALLEN KEY QTY 1 WOOD DOWEL M8 X 30mm QTY 17 6 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 34 PHILLIPS SCREW M4 X 25mm QTY 4 7 a. M4 X 25mm - QTY 2 ( 1 is extra ) b. M4 X 15mm - QTY 1 c.
COMPONENTS-KEY DIAGRAM MODEL # AXWELL3-014GR A Fron t / Av ant HL H H HR C C C BR E Fron t BL Fron t / Av ant D D / Ava nt D F Fron t / Av ant G 7/16
ASSEMBLY MODEL # AXWELL3-014GR STEP-1 1 3 4 C C E C 1. Insert 1 Dowel 3 into guide hole on each Top Divider C . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 3 Top Dividers C to Top Shelf E using 6 Allen Key Screws 1 (2 Screws on each Divider). 4. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWELL3-014GR STEP-2 C C D E C D D 3 2 1. Insert 1 Dowel 3 into guide hole on each Bottom Divider D . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 to Top Shelf E using pre-drilled holes. 4. Align Cam Lock Pins with guide holes on Dividers D . 5. Insert 2 Cam Locks 2 into guide holes on each Divider D . 6. Use flathead screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXWELL3-014GR STEP-3 1 4 3 C C D D E C F Front / Avant D 1. Insert 1 Dowel 3 into guide holes on each Bottom Divider D . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 3 Bottom Dividers D to Bottom Shelf F using 6 Allen Key Screws 1 (2 Screws on each Divider). 4. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWELL3-014GR STEP-4 2 3 Front / Avant BR C C E D Front / Avant C D D BL Front / Avant F 3 2 1. Insert 4 Dowels 3 into guide holes on each Top Shelf E and Bottom Shelf F (2 dowels on each side). 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 to each Side BL , BR using pre-drilled holes. 4. Align Cam Lock Pins with guide holes on Top Shelf E and Bottom Shelf F . 5.
ASSEMBLY MODEL # AXWELL3-014GR STEP-5 1 1 BR Front / Avant A 4 Front / Avant 4 C C E D Front / Avant D C BL Front / Avant D F G 6 1. Attach Top A to Sides BL , BR and 3 Top Dividers C using 15 Allen Key Screws 1 (3 screws on each Side and Divider). 2. Use Allen Key 4 to tighten Screws. Do not over-tighten. 3. Attach Bottom Support Leg G to Bottom Shelf F using 4 Phillips Screws 6 . 4. Use Phillips screwdriver to snugly tighten screw.
ASSEMBLY MODEL # AXWELL3-014GR STEP-6 Warning Label Fron t/A van t A HR H H Fron t/A vant BR HL 5 1. Attach Back Panels H , HL , HR to back frame of cube storage using 34 Phillips Screws Round Head 5 through guide holes. 2. Use Phillips Screwdriver to tighten screws.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-7 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
