SIMP IHOME I L I F E B Y D E S I GN ACADIAN / NORMANDY / BRUNSWICK LADDER SHELF MODEL # AXSS008KD-FG 1/14
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXSS008KD-FG PARTS DESCRIPTION AR AL LEFT SIDE QTY 1 B RIGHT SIDE QTY 1 D C BACK BAR QTY 6 E SHELF QTY 1 F SHELF QTY 1 SHELF QTY 1 G SHELF QTY 1 SHELF QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXSS008KD-FG HARDWARE DESCRIPTION 1 2 CAM LOCK PIN CAM LOCK QTY 20 SETS 4 3 PHILLIPS SCREW M4 X 30mm QTY 24 5 BRACKET QTY 6 WOOD DOWEL Ø8 X 30mm QTY 2 6 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 12 a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM MODEL # AXSS008KD-FG B G B F B E AR AL B D B C 7/14
ASSEMBLY MODEL # AXSS008KD-FG STEP 1 G F E D AL C 1 1 1 1 1 1 3 1. Insert one Dowel 3 into pre-drilled hole on Shelf C . 2. Use rubber mallet to tap Dowel 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Cam Lock Pins 1 to Left Side AL using guide holes. 4. Align Cam Lock Pins with pre-drilled holes on Shelfs C D E F G . 5. Insert Cam Locks 1 into pre-drilled holes on Shelfs C D E F G . 6. Using a flathead screwdriver tighten Cam Locks into Pins.
ASSEMBLY MODEL # AXSS008KD-FG STEP 2 AR 1 1 1 G 1 F 1 E D 1 C 1. To attach Right Side AR to Shelfs C D E F G , repeat step 1.
ASSEMBLY MODEL # AXSS008KD-FG STEP 3 NOTE: The screwdriver is not included in the hardware pack. AR G 5 4 AL F E D C 1. Attach Brackets 4 to bottom corner of Shelfs C E G and Sides AL , AR using Phillips Screw Round Heads 5 . 2. Use phillips screwdriver to tighten Screws.
ASSEMBLY MODEL # AXSS008KD-FG STEP 4 NOTE: The screwdriver is not included in the hardware pack. AR B AL 2 B 1. Attach Back Bars B to back of Sides AL , AR using Phillips Screws 2 into pre-drilled holes. 2. Use phillips screwdriver to tighten Screws.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 5 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
