WAINWRIGHT / ERVINE / CARVEY SIDEBOARD BUFFET MODEL # AXCWAI-10 1/18
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A MODEL # AXCWAI-10 B TOP QTY 1 LARGE SHELF QTY 1 C D1 LEG QTY 2 SMALL SHELF QTY 1 PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 ALLEN KEY BOLT M 8 X 50 mm QTY 8 15 WASHER Ø 22 / Ø 8.5 X 2.0 mm QTY 8 D2 LEG QTY 2 MODEL # AXCWAI-10 4 3 LOCK WASHER Ø 12 / Ø 8.5 X 2.
MODEL # AXCWAI-10 COMPONENTS - KEY DIAGRAM A B C D2 D1 D2 D1 6/18
MODEL # AXCWAI-10 ASSEMBLY STEP 1 D2 D1 A D1 D2 4 1 3 2 1. Attach Legs D1 , D2 to Top A . 2. Use two Bolts 1 , two Washers 2 and two Lock Washers 3 on each leg to attach Legs D1 , D2 to Top A . 3. Use Allen Key 4 to tighten Bolts. Do not over tighten.
ASSEMBLY MODEL # AXCWAI-10 STEP 2 Note: Levelers on bottom of legs can be adjusted if floor is uneven.
MODEL # AXCWAI-10 ASSEMBLY STEP 3 5 A C B 1. Insert four Shelf Supports 5 into the holes of both cabinets of Top A . 2. Insert Shelf B and C on top of the Shelf Supports 5 in each cabinet of Top A .
MODEL # AXCWAI-10 ASSEMBLY FIXING ADJUSTABLE HINGES III II I Tighten the Screw marked ll to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. to adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. if the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. if the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. 3. Drill a 3/16 inch hole in the wall.
DOOR REPLACEMENT (IF REQUIRED) PARTS DESCRIPTION EL ER LEFT DOOR QTY 2 RIGHT DOOR QTY 1 HARDWARE DESCRIPTION 7 PHILLIPS SCREW ROUND HEAD M 3.5 X 15 mm QTY 24 NEED HELP? for help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
DOOR REPLACEMENT (IF REQUIRED) 1. Use a screwdriver to remove Phillips Screws Round Head 7 from the hinges. 2. Remove the Doors EL or ER from the Sideboard.
DOOR REPLACEMENT (IF REQUIRED) 1. Attach hinges on Doors EL or ER to sides of the Sideboard. 2. Place Phillips Screws 7 into pre-drilled holes on sides of the Sideboard. 3. Use Phillips Screwdriver to tighten Screws 7 .
DOOR REPLACEMENT (IF REQUIRED) FIXING ADJUSTABLE HINGES 7 II I Tighten the Screw marked ll to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. to adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . Depth adjustment 4 mm 2.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
