Specification

AXCTOLN-M Tollson Bentwood Gaslift Bar Stool
P a g e
4
|
9
COMPLETED PARTS:
III. Construction/Specifications for wood part:
- Before mass production, product needs to pass all related tests – conform to US Consumer
Product Safety Commission - at Approved Labs.
- All wood must be kiln dry before production and maintained at a humidity level between
8-12% during the manufacturing process.
- The variance of moisture between 2 lamellas cannot be over 2%.
- Width of lamination: should be between 40-80mm.The lamination should have the same width
on a board.
- All products must be free from physical defects such as poor finish, patchy areas, contamination,
pin holes or pitting.
- Dent, chipped mark, nick… are not allowed.
Finish / Color:
- Natural