TM SIMP HOME ® LIFE BY DESIG N TM SAWHORSE / HAWKINS / SPOKANE BEDSIDE TABLE MODEL # AXCSAW-BSFG 1/16
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCSAW-BSFG . . BL BR Fron t ant t / Av Fron t Fron TOP QTY 1 . Fron ant / Av t/A C BACK PANEL QTY 1 E FRONT BAR QTY 1 . F LEG LOWER CONNECTOR QTY 1 . GL DRAWER FRONT QTY 1 . t . D . ant RIGHT SIDE QTY 1 LEFT SIDE QTY 1 . van / Av GR LEFT DRAWER SIDE QTY 1 RIGHT DRAWER SIDE QTY 1 .
PRE-ASSEMBLY INFORMATION . HARDWARE DESCRIPTION 1 2 . . 3 . 4 . 5 ALLEN KEY QTY 1 CAM LOCK PIN CAM LOCK QTY 10 SETS ALLEN KEY SCREW M6 X 30mm QTY 10 ALLEN KEY BOLT & CROSS NUT M6 X 50 mm QTY 2 SETS . MODEL # AXCSAW-BSFG 6 HANDLE M4 X 25 mm QTY 1 WOOD BOLT CAP QTY 2 Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
COMPONENTS-KEY DIAGRAM MODEL # AXCSAW-BSFG A C Fron Fron t / Av ant t / Av ant D BR BL E GR H GL F I 7/16
ASSEMBLY MODEL # AXCSAW-BSFG STEP-1 P 3 X F 1. Attach four Cam Lock Pins 3 to pre-drilled holes at back of Drawer Front F . 2. Use Phillips screwdriver to secure Cam Lock Pins. STEP-2 GR 3 GL F 3 F GR GL 3 1. Align Cam Lock Pins with drilled holes and attach Drawer Sides GL , GR . 2. Insert two Cam Locks 3 into drilled holes on each Drawer Side GL , GR . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCSAW-BSFG STEP-3 GR I F GL 1. Slide Drawer Bottom I firmly into slots on Drawer Sides GL , GR and Drawer Front F . STEP-4 2 H GR I 2 4 F GL 1. Align Drawer Back H with Drawer Bottom I and press firmly into slot . 2. Attach Drawer Back using two Allen Key Screws 2 through drilled holes on each Drawer Side GL , GR . 3. Use Allen Key 4 to tighten Screws. Do not over-tighten STEP-5 5 F 1. Use Phillips screwdriver to attach Handle 5 to Drawer Front F .
ASSEMBLY MODEL # AXCSAW-BSFG STEP-6 P 3 X 3 Fron t van t/A BR 3 3 3 BL Fron t / Av ant 1. Attach three Cam Lock Pins 3 to pre-drilled holes on each Side BL , BR . 2. Use Phillips screwdriver to secure Cam Lock Pins.
ASSEMBLY MODEL # AXCSAW-BSFG STEP-7 Front / Avant BL E 4 1 1. Align wood dowels with drilled holes and attach Leg Lower Connector E . 2. Insert one Cross Nut 1 into drilled holes on Leg Lower Connector E . Use a flathead Screwdriver to turn it to align with the Bolt 1 . 3. Use Allen Key 4 to tighten Bolt.
ASSEMBLY MODEL # AXCSAW-BSFG STEP-8 3 C D E Front t / Avan BL 3 1. Align Cam Lock Pins with drilled holes and attach Back Panel C . 2. Align Cam Lock Pins with drilled holes and attach Front Bar D . 3. Insert two Cam Locks 3 into drilled holes on Back Panel C . 4. Insert one Cam Lock 3 into drilled hole on Front Bar D . 5. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCSAW-BSFG STEP-9 3 BR Front / Avant D Front / Avant 3 Front / Avant C E Front / Avant BL 4 1 1. Repeat Step 7-8 for Right Side BR .
ASSEMBLY MODEL # AXCSAW-BSFG STEP-10 2 BR BL 4 A 2 BR BL 4 A 1. Attach Top A to Sides BL , BR using six Allen Key Screws 2 ( three Screws / each Side ). 3. Use Allen Key 4 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCSAW-BSFG STEP-11 6 6 6 1. Insert two Wood Bolt Caps 6 into exposed bolt holes on Sides BL , BR . 2. Use rubber mallet to tap Wood Bolt Caps 6 into drilled holes securely. 3. Insert assembled Drawer into glides on assembled Bedside.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
