Instructions / Assembly

ASSEMBLY
STEP 3
1. Use Phillips Screwdriver to attach Handle 5 to Drawer Front H .
Repeat Step 1-4 for the other three drawers.
STEP 4
MODEL # AXCRWSH06-LGB
1. Align Drawer Back J with Drawer Bottom K and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each Side IL , IR .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
10/17
IL
IR