Instructions / Assembly

ASSEMBLY

STEP 6

11/15

MODEL # 3AXCRGL007

1. Attach hinges on Doors FL , FR to Sides CL , CR using Phillips Screws 6 into

pre-drill holes:

- Using Phillips screwdriver to attach Screws 6 at middle hole of hinges for both top &

bottom hinges.

- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.

- Using Phillips screwdriver to tighten the rest of screws 6 into pre-drill holes ( top & bottom

holes on hinges).

2. Attach Magnet Plates 10 to bottom corner of Doors FL , FR using Phillips Screws 5 into

pre-drilled holes on Doors FL , FR .

3. Attach Magnets 10 using Phillips Screws 5 into pre-drilled holes on Bottom Shelf B .

4. Use Phillips screwdriver to attach Handles 9 to Doors FL , FR through guide holes.

First Step

Last Step ( after adjust the door )