SIMP IHOME I L I F E B Y D E S I GN KITCHENER / WATERLOO / PROVIDENCE MEDIUM STORAGE CABINET MODEL # 3AXCRGL007 1/15
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # 3AXCRGL007 PARTS DESCRIPTION B A CL Fro nt / Ava nt t van t/A Fron TOP QTY 1 BOTTOM SHELF QTY 1 D CR LEFT SIDE QTY 1 E Fron t/A van t t van t/A Fron RIGHT SIDE QTY 1 FL CABINET SHELF QTY 4 FR LEFT DOOR QTY 1 CENTRE SUPPORT QTY 1 GL RIGHT DOOR QTY 1 LEFT BACK PANEL QTY 1 GR Warning Label RIGHT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # 3AXCRGL007 HARDWARE DESCRIPTION 1 2 3 ALLEN KEY SCREW M6 X 30 mm QTY 9 4 5 6 PHILLIPS SCREW M3 X 15 mm QTY 8 ALLEN KEY QTY 1 7 WOOD DOWEL Ø8 X 30 mm QTY 10 CAM LOCK PIN CAM LOCK QTY 9 SETS PHILLIPS SCREW M3 X 12 mm QTY 12 9 8 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 24 SHELF SUPPORT QTY 24 HANDLE M4 X 25 mm QTY 2 SETS 11 10 MAGNET AND PLATE QTY 2 SETS a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM A MODEL # 3AXCRGL007 Fron t/A van t CL GL GR CR E D D FL FR D D Fron t/A van t Fron t/A van t B Fron t/A van t 7/15
ASSEMBLY MODEL # 3AXCRGL007 STEP 1 Front / Avant CR Front / Avant Front / Avant 3 CL B 2 1. Insert Dowels 3 into guide holes of Bottom Shelf B . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Cam Lock Pins 2 to the Sides CL , CR using pre-drilled holes. 4. Align Dowels 3 on Bottom Shelf B with guide holes on Sides CL , CR . 5. Align and insert Cam Lock Pins 2 into guide holes on Bottom Shelf B . 6.
ASSEMBLY MODEL # 3AXCRGL007 STEP 3 3 2 1 A CL Front / Avant Front / Avant 4 B Front / Avant Front / Avant E CR 1. Insert 2 Dowels 3 into top corners of each Side CL , CR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to middle Top A . 4. Align Cam Lock Pins with guide holes and attach Centre Support E . 5. Align guide holes on bottom corners of Top A with Dowels 3 in Sides CL , CR . 6.
ASSEMBLY MODEL # 3AXCRGL007 ° 90 Triangle ruler STEP 4 ° 90 ° 90 ° 90 NOTE: The triangle ruler is not included in the hardware pack. Adjust the cabinet frame before assembling the back panels. STEP 5 Note: The back of the cabinet frame does not have pre-drilled holes to attach the back panels. Warning Label Fro nt / Ava nt 7 GR Fron t/A van t GL 1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round Head 7 into guide holes. 2. Use Phillips screwdriver to tighten screws.
ASSEMBLY MODEL # 3AXCRGL007 First Step STEP 6 6 A CL CR E FL Last Step ( after adjust the door ) FR 6 B 6 5 10 5 9 1. Attach hinges on Doors FL , FR to Sides CL , CR using Phillips Screws 6 into pre-drill holes: - Using Phillips screwdriver to attach Screws 6 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
ASSEMBLY MODEL # 3AXCRGL007 STEP 7 shelf level 1 shelf support anti - tipping shelf level 2 8 shelf level 3 D 8 D D D D D 1. Use Shelf Supports 8 for each Shelf D in desired location. 2. 2 Shelf Supports 8 may be used on back top of each shelf D as a tipping restraint.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 8 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
