TM SIMP HOME ® LIFE BY DESIG N TM REDMOND / MANSFIELD / STANWICK 72 INCH TV MEDIA STAND MODEL # AXCRED72-BRU 1/24
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION AL MODEL # AXCRED72-BRU B AR Front Front / Avan t Front / Avan t LEFT SIDE QTY 1 C nt / Ava TOP QTY 1 RIGHT SIDE QTY 1 DL DR ant t / Av Fron Front LEFT LARGE DIVIDER QTY 1 BOTTOM SHELF QTY 1 E F LARGE DOOR (L&R Same) QTY 2 Front t / Avan / Avan t RIGHT LARGE DIVIDER QTY 1 GL CABINET SHELF QTY 2 LEFT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION GR Warning Label G1 RIGHT BACK PANEL QTY 1 H G2 TOP BACK PANEL QTY 1 LEFT DRAWER SIDE QTY 1 DRAWER FRONT QTY 1 TOP SHELF QTY 1 K RIGHT DRAWER SIDE QTY 1 BOTTOM BACK PANEL QTY 1 JL I JR MODEL # AXCRED72-BRU L DRAWER BACK QTY 1 DRAWER BOTTOM QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION M MODEL # AXCRED72-BRU N O Fron ant t / Av nt / Ava Front FLIP DOWN DOOR QTY 1 P MIDDLE SHELF QTY 1 QL QR Front SMALL DOOR (L&R Same) QTY 2 SMALL DIVIDER QTY 1 t / Avan LEFT MIDDLE DIVIDER QTY 1 Front / Avan t RIGHT MIDDLE DIVIDER QTY 1 R SUPPORT LEG QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRED72-BRU HARDWARE DESCRIPTION 2 1 ALLEN KEY SCREW M6 X 30mm QTY 52 3 ALLEN KEY QTY 1 5 4 6 8 MAGNET AND PLATE QTY 5 SETS PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 31 PHILLIPS SCREW M3 X 15mm QTY 20 PHILLIPS SCREW M3 X 12mm QTY 24 7 SHELF SUPPORT QTY 12 9 HANDLE M4 X 22mm QTY 4 SETS CAM LOCK PIN CAM LOCK QTY 10 SETS NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 11 10 12 PHILLIPS SCREW M4 X 30mm QTY 8 HANDLE M4 X 10mm QTY 2 SETS MODEL # AXCRED72-BRU PHILLIPS SCREW M3.5 X 12mm QTY 12 14 13 a.M4X25mm-QTY2 (1siextra) b.M4X15mm-QTY1 c.M4X25mm-QTY1 HINGE QTY 2 SETS FURNITURETIPOVERRESTRAINT QTY1SET Required Flathead screwdriver Phillips screwdriver Not Included NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
COMPONENTS-KEY DIAGRAM MODEL # AXCRED72-BRU N M Fron B t/A vant GL Fron t G1 GR Fron t / Av O G2 ant vant DL AL F H E F Fron t / Av Fron t/A QL vant M nt AR DR Fron t/A / Ava ant P QR P E Fron t C / Ava nt R R K JR L I JL 10/24
ASSEMBLY MODEL # AXCRED72-BRU STEP-1 JR JL I 9 1. Attach four Cam Lock Pins 9 to back of Drawer Front I . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides JL , JR . 3. Insert two Cam Locks 9 into pre-drilled holes on each Drawer Side JL , JR . 4. Use flathead screwdriver to secure Cam Locks. STEP-2 JR L JL I 1. Slide Drawer Bottom L firmly into slots on Drawer Sides JL , JR and Drawer Front I .
ASSEMBLY MODEL # AXCRED72-BRU STEP-3 JR K 1 L 2 JL 1. Align Drawer Back K with Drawer Bottom L and press firmly into slot. 2. Attach Drawer Back K using two Allen Key Screws 1 through pre-drilled holes on each Side JL , JR . 3. Use Allen Key 2 to tighten Screws. Do not over-tighten. STEP-4 10 NOTE: The screwdriver is not included in the hardware pack. I 1. Use phillips screwdriver to attach Handle 10 to Drawer Front I .
ASSEMBLY MODEL # AXCRED72-BRU STEP-5 Front / Avant 1 QL Front / Avant Front / Avant 2 Front / Avant N QR 1. Attach Middle Dividers QL , QR to Middle Shelf N using six Allen Key Screws 1 (three screws on each Middle Divider). 2. Use Allen Key 2 to tighten. Do not over-tighten. STEP-6 9 Front / Avant QL Front / Avant Front / Avant H QR 1. Attach six Cam Lock Pins 9 to underneath of Top Shelf H . 2. Align Cam Lock Pins with pre-drilled holes and attach Middle Dividers QL , QR . 3.
ASSEMBLY MODEL # AXCRED72-BRU STEP-7 1 2 Front / Avant H Front / Avant Front / Avant Front / Avant Front / Avant DL DR 1. Attach Large Dividers DL , DR to Top Shelf H using six Allen Key Screws 1 (three screws on each Divider). 2. Use Allen Key 2 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCRED72-BRU STEP-8 1 2 Front / Avant Front / Avant DL H Front / Avant QR Front / Avant C Front / Avant Front / Avant QL O DR 1 2 1 2 1. Attach Bottom Shelf C to Middle Dividers QL , QR and Large Dividers DL ,DR using twelve Allen Key Screws 1 (three screws on each Divider). 2. Attach Small Divider O to Top Shelf H using three Allen Key Screws 1 3. Use Allen Key 2 to tighten. Do not over-tighten.
ASSEMBLY MODEL # AXCRED72-BRU STEP-9 R AR Front / Avant C Front / Avant R Front / Avant Front / Avant AL Front / Avant NOTE: The screwdriver is not included in the hardware pack. 1 2 11 1. Attach Sides AL , AR to Bottom Shelf C using six Allen Key Screws 1 (three Screws on each Side). 2. Use Allen Key 2 to tighten Screws. Do not over-tighten. 3. Attach Support Legs R to Bottom Shelf C using eight Phillips screws 11 (four Phillips screw on each Support Leg). 4.
ASSEMBLY MODEL # AXCRED72-BRU STEP-10 O Front / Avant Front / Avant AL DL 1 B Front / Avant Front / Avant DR Front / Avant 1 2 2 AR 1. Attach Top B to Sides AL , AR , Small Divider O and Large Dividers DL , DR using fifteen Allen Key Screws 1 (three screws on each Side, Divider). 2. Use Allen Key 2 to tighten. Do not over-tighten. STEP-11 NOTE: The screwdriver is not included in the hardware pack. Warning Label B 6 GL ant t / Av Fron G1 G2 GR ant / Av Front 1.
ASSEMBLY MODEL # AXCRED72-BRU STEP-12 12 NOTE: The screwdriver is not included in the hardware pack. 13 Fro nt / Fro Ava nt nt / Fro QL nt Ava nt / Fro nt / Fro nt Ava 5 nt / 7 nt Ava nt Ava N QR nt / M Fro nt Ava nt / nt Ava Fro nt / Fro nt Ava 5 10 7 1. Attach Flip Down Door M to Middle Shelf N using two Hinges 13 and twelve Phillips Screws 12 . 2.
ASSEMBLY MODEL # AXCRED72-BRU STEP-13 NOTE: The screwdriver is not included in the hardware pack. 4 E AL t van t/A Fron DL P t van t/A Fron DR AR P E 8 1. Attach hinges on Large Doors E to Sides AL , AR using Phillips Screws 4 into guide holes. 2. Attach hinges on Small Doors P to Large Dividers DL , DR using Phillips Screws 4 into guide holes. 3. Use a Phillips screwdriver to snugly tighten screw. 4. Use Phillips screwdriver to attach Handle 8 to Large Doors E and Small Doors P .
ASSEMBLY MODEL # AXCRED72-BRU STEP-14 NOTE: The screwdriver is not included in the hardware pack. E DL P DR QR QL P 7 7 5 E 5 1. Attach Magnets Plates 7 to bottom corner of Large Doors E and Small Doors P . using Phillips Screws 5 into guide holes on Large Doors E and Small Doors P . 2. Attach Magnets 7 using Phillips Screws 5 into guide holes on Large Dividers DL , DR and Middle Dividers QL , QR . 3. Use Phillips Screwdriver to snugly tighten screw.
ASSEMBLY MODEL # AXCRED72-BRU STEP-15 3 3 F F 3 F 1. Use four Shelf Supports 3 for each Cabinet Shelf F in desired location. 2. Two Shelf Supports 3 may be used on back top of each Cabinet Shelf F as a tipping restraint. 3. Insert assembled drawer into glides on assembled TV Media Stand.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-16 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
