Instructions/Assembly Guide

STEP-7

12/22

1. Align Cam Lock Pins with pre-drilled holes and attach Drawer Bottom Support P .

2. Insert one Cam Lock 9 into pre-drilled holes on Drawer Bottom Support P .

3. Use flathead screwdriver to secure Cam Locks.

4. Attach Large Drawer Back M to Drawer Bottom Support P using two Phillips

screws 11 .

5. Use Phillip Screwdriver to snugly tighten screw.

6. Align Large Drawer Back M with Large Drawer Bottom O and press firmly into slot.

7. Attach Large Drawer Back M using two Allen Key Screws 1 through pre-drilled

holes on each Side KL , KR .

8. Use Allen Key 2 to tighten Screws. Do not over-tighten.

NOTE: The screwdriver is not

included in the hardware pack.

ASSEMBLY

MODEL # AXCRED15-FG