Instructions/Assembly Guide

STEP-3

STEP-4

10/22

1. Align Small Drawer Back L with Small Drawer Bottom N and press firmly into slot.

2. Attach Small Drawer Back L using two Allen Key Screws 1 through pre-drilled

holes on each Side KL , KR .

3. Use Allen Key 2 to tighten Screws. Do not over-tighten.

NOTE: The screwdriver is not

included in the hardware pack.

1. Use phillips screwdriver to attach Handle 10 to Small Drawer Front I .

Repeat Step 1 - 4 for the remaining drawers.

ASSEMBLY

MODEL # AXCRED15-FG