TM SIMP HOME ® LIFE BY DESIG N TM REDMOND / MANSFIELD / STANWICK MEDIUM STORAGE CABINET MODEL # AXCRED15-FG 1/22
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION AL MODEL # AXCRED15-FG AR B Front / Front / Avant Avant RIGHT SIDE QTY 1 LEFT SIDE QTY 1 D C t van t/A Fron TOP QTY 1 E vant Front / A DIVIDER QTY 1 BOTTOM QTY 1 F GL CABINET SHELF QTY 1 DOOR QTY 1 GR LEFT BACK PANEL QTY 1 Warning Label RIGHT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION H I J TOP SHELF QTY 1 KL LEFT DRAWER SIDE QTY 4 L SMALL DRAWER BACK QTY 3 RIGHT DRAWER SIDE QTY 4 O N LARGE DRAWER BACK QTY 1 LARGE DRAWER FRONT QTY 1 SMALL DRAWER FRONT QTY 3 KR M MODEL # AXCRED15-FG SMALL DRAWER BOTTOM QTY 3 LARGE DRAWER BOTTOM QTY 1 P DRAWER BOTTOM SUPPORT QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRED15-FG HARDWARE DESCRIPTION 2 1 ALLEN KEY SCREW M6 X 30mm QTY 34 3 ALLEN KEY QTY 1 5 4 PHILLIPS SCREW M3 X 12mm QTY 6 6 8 9 HANDLE M4 X 22mm QTY 1 SET MAGNET AND PLATE QTY 1 SET 11 HANDLE M4 X 10mm QTY 5 SETS PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 19 PHILLIPS SCREW M3 X 15mm QTY 4 7 10 SHELF SUPPORT QTY 6 PHILLIPS SCREW M4 X 30mm QTY 2 CAM LOCK PIN CAM LOCK QTY 23 SETS 12 a.M4X25mm-QTY2 (1siextra) b.M4X15mm-QTY1 c.
COMPONENTS-KEY DIAGRAM Fron t / Av MODEL # AXCRED15-FG B ant GL GR AR F D Fron t / Av AL Fron t E Fron t / Av ant ant H / Ava nt C M KR P O J KL L KL N KR I 8/22
ASSEMBLY MODEL # AXCRED15-FG STEP-1 KR KL I 9 1. Attach four Cam Lock Pins 9 to back of Small Drawer Front I . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides KL , KR . 3. Insert two Cam Lock 9 into pre-drilled holes on each Drawer Side KL , KR . 4. Use flathead screwdriver to secure Cam Locks. STEP-2 KR N KL I 1. Slide Small Drawer Bottom N firmly into slots on Drawer Sides KL , KR and Small Drawer Front I .
ASSEMBLY MODEL # AXCRED15-FG STEP-3 L KR 1 N 2 KL 1. Align Small Drawer Back L with Small Drawer Bottom N and press firmly into slot. 2. Attach Small Drawer Back L using two Allen Key Screws 1 through pre-drilled holes on each Side KL , KR . 3. Use Allen Key 2 to tighten Screws. Do not over-tighten. STEP-4 10 NOTE: The screwdriver is not included in the hardware pack. I 1. Use phillips screwdriver to attach Handle 10 to Small Drawer Front I . Repeat Step 1 - 4 for the remaining drawers.
ASSEMBLY MODEL # AXCRED15-FG STEP-5 J KR KL 9 9 1. Attach five Cam Lock Pins 9 to back of Large Drawer Front J . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides KL , KR . 3. Insert two Cam Lock 9 into pre-drilled holes on each Drawer Side KL , KR . 4. Use flathead screwdriver to secure Cam Locks. STEP-6 KR J O KL 1. Slide Large Drawer Bottom O firmly into slots on Drawer Sides KL , KR and Large Drawer Front J .
ASSEMBLY MODEL # AXCRED15-FG STEP-7 NOTE: The screwdriver is not included in the hardware pack. 9 P KL O KL M 11 2 1 1. Align Cam Lock Pins with pre-drilled holes and attach Drawer Bottom Support P . 2. Insert one Cam Lock 9 into pre-drilled holes on Drawer Bottom Support P . 3. Use flathead screwdriver to secure Cam Locks. 4. Attach Large Drawer Back M to Drawer Bottom Support P using two Phillips screws 11 . 5. Use Phillip Screwdriver to snugly tighten screw. 6.
ASSEMBLY MODEL # AXCRED15-FG STEP-8 NOTE: The screwdriver is not included in the hardware pack. 10 J 1. Use phillips screwdriver to attach two Handles 10 to Large Drawer Front J .
ASSEMBLY MODEL # AXCRED15-FG Front / Avant STEP-9 1 D 2 H 1. Attach Divider D to Top Shelf H using three Allen Key Screws 1 . 2. Use Allen Key 2 to tighten. Do not over-tighten. Front / Avant AL Front / Avant STEP-10 9 H C 1 2 1. Attach three Cam Lock Pins 9 to back of Left Side AL . 2. Align Cam Lock Pins with pre-drilled holes and attach Top Shelf H . 3. Insert three Cam Lock 9 into pre-drilled holes on Top Shelf H . 4. Use flathead screwdriver to secure Cam Locks. 5.
ASSEMBLY MODEL # AXCRED15-FG Front / Avant AL Front / Avant STEP-11 9 Front / Avant H AR C 2 1 1. Repeat Step-10 for The Right Side AR .
ASSEMBLY MODEL # AXCRED15-FG STEP-12 1 2 2 1 Front / Avant AL Front / Avant Front / Avant B Front / Avant D AR 1. Attach Top B to Side AR , AL and Divider D using nine Allen Key Screws 1 (three screws on each Side and Divider). 2. Use Allen Key 2 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCRED15-FG STEP-13 NOTE: The screwdriver is not included in the hardware pack. Note: Thebackofthecabinetframedoesnothave pre-driledholestoattachthebackpanels. 6 Warning Label t van B /A ont Fr t van A nt / Fro GL GR 1. Attach Back Panels GL , GR to back frame of cabinet using nineteen Phillips Screws Round Head 6 through pre-drilled holes. 2. Use Phillips Screwdriver to tighten screws.
ASSEMBLY MODEL # AXCRED15-FG STEP-14 NOTE: The screwdriver is not included in the hardware pack. 4 8 nt / Fro nt Ava AR AL D t nt Fro an / Av nt / Fro Ava nt E 7 7 5 5 1. Attach hinges on Door E to Rihgt Side AR using Phillips Screws 4 into guide holes. 2. Attach Magnet Plates 7 to bottom corner of Door E using Phillips Screws 5 into guide holes on Door E . 3. Attach Magnets 7 using Phillips Screws 5 into guide holes on Divider D . 4. Use Phillips screwdriver to snugly tighten screw. 5.
ASSEMBLY MODEL # AXCRED15-FG STEP-15 3 3 D AR F E 3 F 1. Use four Shelf Supports 3 for each Cabinet Shelf F in desired location. 2. Two Shelf Supports 3 may be used on back top of each Cabinet Shelf F as a tipping restraint. 3. Insert assembled drawer into glides on assembled medium storage.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
