TM SIMP HOME ® LIFE BY DESIG N TM REDMOND / MANSFIELD / STANWICK LOW STORAGE CABINET MODEL # AXCRED14-BRU 1/15
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PART DESCRIPTION AL MODEL # AXCRED14-BRU B AR Fron Front / Front / A Avant vant LEFT SIDE QTY 1 C vant t/A TOP QTY 1 RIGHT SIDE QTY 1 E D ant t / Av Fron Front / DIVIDER QTY 1 BOTTOM SHELF QTY 1 F Avant GL CABINET SHELF QTY 2 DOOR (L&R Same) QTY 2 GR LEFT BACK PANEL QTY 1 Warning Label RIGHT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRED14-BRU HARDWARE DESCRIPTION 2 1 ALLEN KEY SCREW M6 X 30mm QTY 12 4 3 5 PHILLIPS SCREW M3 X 12mm QTY 12 7 6 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 16 PHILLIPS SCREW M3 X 15mm QTY 16 8 MAGNET AND PLATE QTY 4 SETS SHELF SUPPORT QTY 12 ALLEN KEY QTY 1 9 HANDLE M4 X 22mm QTY 2 SETS a.M4X25mm-QTY2 (1siextra) b.M4X15mm-QTY1 c.
COMPONENTS-KEY DIAGRAM MODEL # AXCRED14-BRU B Fron t / Av ant GL GR AR D AL F E F Fron t/ E Fron Fron t Avan t / Ava nt t/A vant C Fron t/A vant 7/15
ASSEMBLY MODEL # AXCRED14-BRU STEP-1 Front / Avant C Front / Avant Front / Avant Front / Avant Front / Avant AL AR 1 2 1. Attach Sides AL , AR to Bottom Shelf C using four Allen Key Screws 1 (two screws on each Side) . 2. Use Allen Key 2 to tighten screws. Do not over-tighten. C 2 Front / Avant 1 Front / Avant Front / Avant Front / Avant D Front / Avant STEP-2 1. Attach Divider D to Bottom Shelf C using two Allen Key Screws 1 . 2. Use Allen Key 2 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCRED14-BRU STEP-3 1 2 1 2 Front / Avant B Front / Avant Front / Avant Front / Avant AL Front / Avant D AR 1. Attach Top B to Sides AL , AR and Divider D using six Allen Key Screws 1 (two screws on each Side and Divider). 2. Use Allen Key 2 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCRED14-BRU STEP-4 NOTE: The screwdriver is not included in the hardware pack. Note: Thebackofthecabinetframedoesnothave pre-driledholestoattachthebackpanels. 6 Warning Label B vant t/A Fron GL GR t Fron / Av ant 1. Attach Back Panels GL , GR to back frame of cabinet using sixteen Phillips Screws Round Head 6 through pre-drilled holes. 2. Use Phillips Screwdriver to snugly tighten screws.
ASSEMBLY MODEL # AXCRED14-BRU STEP-5 NOTE: The screwdriver is not included in the hardware pack. 4 8 t van t/A n Fro E AR D AL t van A nt / Fro t van t/A Fro nt / nt Ava n Fro E 7 5 7 5 1. Attach hinges on Doors E to Sides AL , AR using Phillips Screws 4 into guide holes. 2. Attach Magnet Plates 7 to bottom corner and up corner of Doors E using Phillips Screws 5 into guide holes on Doors E . 3. Attach Magnets 7 using Phillips Screws 5 into guide holes on Divider D . 4.
ASSEMBLY MODEL # AXCRED14-BRU STEP-6 3 3 t van t/A n Fro AL D AR F E F t nt / Fro n Ava t nt Fro a / Av nt nt / Fro n Ava E 3 F 1. Use four Shelf Supports 3 for each Cabinet Shelf F in desired location. 2. Two Shelf Supports 3 may be used on back top of each Cabinet Shelf F as a tipping restraint.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-7 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
