SIMP IHOME I L I F E B Y D E S I GN BURLINGTON / PORTLAND / BERKSHIRE MEDIUM STORAGE CABINET MODEL # AXCRBUR15-MAH 1/16
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXCRBUR15-MAH PARTS DESCRIPTION B AR AL vant t/A Fron Fron t / Av ant vant t/A Fron RIGHT SIDE QTY 1 LEFT SIDE QTY 1 D C TOP QTY 1 EL vant t/A Fron vant t/A Fron CENTRE SUPPORT QTY 1 BOTTOM SHELF QTY 1 F ER RIGHT DOOR QTY 1 GL CABINET SHELF QTY 4 LEFT BACK PANEL QTY 1 LEFT DOOR QTY 1 GR Warning Label RIGHT BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRBUR15-MAH HARDWARE DESCRIPTION 1 2 3 ALLEN KEY SCREW M6 X 30 mm QTY 18 4 WOOD DOWEL Ø8 X 30 mm QTY 4 5 6 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 24 7 PHILLIPS SCREW M3 X 12 mm QTY 12 8 MAGNET AND PLATE QTY 4 SETS ALLEN KEY QTY 1 SHELF SUPPORT QTY 24 9 a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM MODEL # AXCRBUR15-MAH Fron t / Av ant GL GR AR AL Fron t / Av ant Fron t / Av ant Fron t / Av ant ER Fron t / Av ant EL 7/16
ASSEMBLY MODEL # AXCRBUR15-MAH STEP 1 AR Front / Avant C Front / Avant Front / Avant Front / Avant AL 1. Insert four Dowels 2 into guide holes on Bottom Shelf C ( two dowels on each Side ). 2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align Dowels 2 on Bottom Shelf C with guide holes on Sides AL , AR . 4. Attach Sides AL , AR to Bottom Shelf C using six Allen Key Screws 1 ( three Screws on each Side ). 5. Use Allen Key 3 to tighten.
ASSEMBLY MODEL # AXCRBUR15-MAH STEP 2 Front / Avant Front / Avant AL D Front / Avant Front / Avant AR Front / Avant C 1. Attach Centre Support D to Bottom Shelf C using three Allen Key Screws 1 . 2. Use Allen key 3 to tighten. Do not over-tighten. Note: Prior to inserting Allen Key Screws 1 , ensure that the direction the holes for the Shelf Supports 6 on Centre Support D and the holes for the Shelf Supports 6 on the Side AL , AR are compatible.
ASSEMBLY MODEL # AXCRBUR15-MAH Front / Avant Front / Avant STEP 3 AL D Front / Avant Front / Avant Front / Avant Front / Avant Front / Avant B AR 1. Attach Top B to Centre Support D and Side AL , AR using nine Allen Key Screws 1 ( three Screws on each part ). 2. Use Allen key 3 to tighten. Do not over-tighten.
ASSEMBLY MODEL # AXCRBUR15-MAH STEP 4 90 ° ° 90 NOTE: The triangle ruler is not included in the hardware pack. ° 90 90 ° Triangle ruler 90 90 90 ° ° ° 90 Adjust the cabinet frame before assembling the back panels. ° STEP 5 Note: The back of the cabinet frame does not have pre-drilled holes to attach the back panels. Warning Label Fron t/A vant Fron t/A vant 4 Fron t/A vant Fron t/A vant GL GR GL GR 1.
ASSEMBLY STEP 6 MODEL MODEL # AXCRBUR15-MAH # AXCRBUR15First Step Last Step ( after adjust the door ) 5 5 5 AL D 7 AR 9 ER EL 9 7 1. Attach hinges on Doors EL , ER to Sides AL , AR using Phillips Screws 5 into pre-drill holes: - Using Phillips screwdriver to attach Screws 5 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
ASSEMBLY MODEL # AXCRBUR15-MAH STEP 7 shelf level 1 shelf support anti - tipping shelf level 2 6 shelf level 3 6 1. Use four Shelf Supports 6 for each Shelf F in desired location . 2. Two Shelf Supports 6 may be used on back top of each Shelf F as a tipping restraint.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 8 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
