SIMP IHOME I L I F E B Y D E S I GN ARTISAN / HOLDEN / STRATFORD ENTRYWAY STORAGE BENCH MODEL # AXCRART13-RUS 1/14
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXCRART13-RUS PARTS DESCRIPTION A BL LEFT SIDE QTY 1 SEAT QTY 1 C BR D E BACK PANEL QTY 1 FRONT PANEL QTY 1 F RIGHT SIDE QTY 1 G BACKREST QTY 1 H l ertica V / ide Up S DIVIDER QTY 1 BOTTOM PANEL QTY 1 BOTTOM SUPPORT LEG QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRART13-RUS HARDWARE DESCRIPTION 1 2 ALLEN KEY BOLT M6 X 50 mm QTY 4 4 3 CAM LOCK PIN CAM LOCK QTY 4 SETS 5 6 8 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 4 PHILLIPS SCREW M4 X 35 mm QTY 14 PHILLIPS SCREW M4 X 15 mm QTY 6 ALLEN KEY QTY 1 7 WOOD DOWEL Ø8 X 30 mm QTY 8 9 LID SUPPORT QTY 1 WOOD BOLT CAPS QTY 4 Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included NEED HELP? For help with assembly or if you are missing a part, Please
COMPONENTS – KEY DIAGRAM MODEL # AXCRART13-RUS E BR A Up Sid e F / Verti cal D C BL G H 7/14
ASSEMBLY MODEL # AXCRART13-RUS STEP 1 Up Side / Vertical Small pre-drilled holes F 2 D Pre-drilled holed of Hinges 1. Screw 2 threaded Cam Lock Pins 2 into pre-drilled holes on the back of Back Panel D . 2. Screw only to where the threading ends and ensure they are straight. Do not use excessive force to over-screw cam lock pin. ( Note: please pay close attention to the location of the 2 small pre-drilled holes which accommodate the lid support.
ASSEMBLY MODEL # AXCRART13-RUS STEP 3 NOTE: The screwdriver is not included in the hardware pack. Up Side / Vertical C F 2 1. Screw 2 threaded Cam Lock Pins 2 into pre-drilled holes on the back of Front Panel C . 2. Screw only to where the threading ends and ensure they are straight. Do not use excessive force to over-screw cam lock pin. 3. Align threaded cam lock pins in Panel C to the 2 pre-drilled holes leading to the round cam lock inserts in Divider F .
ASSEMBLY MODEL # AXCRART13-RUS STEP 4 3 6 BL C 9 D E 1 4 1. Align Left Side BL with assembled unit ( Front Panel C and Back Panel D ). 2. Insert 4 Wood dowels 3 into panel C and D . 3. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 4. Attach by inserting 6 Phillips Screws 6 into pre-drilled holes on the panel C and D . 5. Align Backrest E with Left Side BL and fix by 2 Allen Key Screws 1 . 6. Use Allen Key 4 to tighten screws.
ASSEMBLY MODEL # AXCRART13-RUS STEP 5 C BL D BR E 6 1 4 9 3 1. Align Right Side BR with assembled unit ( Front Panel C and Back Panel D ). 2. Insert 4 Wood dowels 3 into panel C and D . 3. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of Dowels should be exposed. 4. Attach by inserting 6 Phillips Screws 6 into pre-drilled holes on the panel C and D . 5. Align Backrest E with Right Side BR and fix by 2 Allen Key Screws 1 . 6. Use Allen Key 4 to tighten screws.
ASSEMBLY MODEL # AXCRART13-RUS STEP 6 NOTE: The screwdriver is not included in the hardware pack. 6 G H 1. Use 2 Phillips Screws 6 to attach Bottom Support Leg H into bottom of Bottom Panel G using centre support guide holes. 2. Use Phillips screwdriver to tighten screws. Do not over-tighten. STEP 7 A D 5 1. Align Seat A with assembled unit ( Back Panel D ). 2. Use 6 Phillips Screws 5 to fix by part A to part D . 3. Use Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY STEP 8 MODEL # AXCRART13-RUS NOTE: The screwdriver is not included in the hardware pack. 7 A F 8 7 1. Attach Lid Support 8 with assembled unit ( Seat A and Divider F ). 2. Attach by inserting 4 Phillips Screws Round Head 7 into pre-drilled holes. 3. Use Phillips screwdriver to tighten screws. Do not over-tighten.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
