Instructions / Assembly
Table Of Contents
ASSEMBLY
STEP 3
STEP 4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front I .
Repeat Step 1-4 for the other drawers.
1. Align Drawer Back K with Drawer Bottom L and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen Key 3 to tighten Screws. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
I
JR
JL
L
K
1
3
I
4
MODEL # AXCRAMH15-HIC
10/21