Instructions / Assembly

9/15
ASSEMBLY
STEP 3
1. Align Drawer Back G with Drawer Bottom H and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen Key 3 to tighten. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 5 to Drawer Front E .
STEP 4
Repeat Step 1-4 for the second drawer.
NOTE: The screwdriver is not
included in the hardware pack.
5
E
3
1
G
FL
FR
MODEL # AXCRAMH06-HIC