FOLEY / PARKS / ANDERSON SWIVEL OFFICE CHAIR MODEL # AXCOCHR-14
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A B BACK QTY 1 C E D F MECHANISM QTY 1 RIGHT ARM QTY 1 G H BASE QTY 1 LEFT ARM QTY 1 SEAT QTY 1 GAS LIFT QTY 1 I CASTER QTY 5 GAS LIFT CAP QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 3 2 SHORT BOLT M6 X 20mm QTY 4 4 LONG BOLT M6 X 25mm QTY 8 WASHER M6 X 18mm QTY 4 5 CAP QTY 8 ALLEN KEY M6 QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
ASSEMBLY STEP 1 Place the Base (G) upside down on a flat smooth surface. Attach the Casters (H) to the Base (G). Attach Gas Lift (F) and Gas Lift Cap (I) to the Base (G).
ASSEMBLY STEP 2 Place the Seat (B) on its back on a flat smooth surface. Attach the Mechanism (E) to the bottom of the Seat (B) with Short Bolts (1) and four Washers (3). Use Allen Key (5) to tighten.
ASSEMBLY STEP 3 Place the Seat (B) right side up on the Gas Lift (F). Attach the Left Arm (C) and Right Arm (D) to the Seat (B) using two Long Bolts (2) on the bottom two holes of each Arm (C) and (D). Use Allen Key (5) to tighten.
ASSEMBLY STEP 4 Attach the Left Arm (C) and Right Arm (D) to the Back (A) using one Long Bolt (2) on the second hole from the top of each Arm (C) and (D). Use Allen Key (5) to tighten.
ASSEMBLY STEP 5 Straighten the Back (A) to an upright position. Complete attaching the Left Arm (C) and Right Arm (D) to the Back (A) using one Long Bolt (2) on the first hole of top of each Arm (C) and (D). Use Allen Key (5) to tighten.
ASSEMBLY STEP 6 Place four Bolt Caps (4) on each Arm (C) and (D).
ASSEMBLY STEP 7 The tension knob is located under the seat cushion. Turn the knob clockwise to tighten the tilt mechanism. Turn the knob counter-clockwise to loosen the tilt mechanism.
ASSEMBLY STEP 8 To raise the seat, lift your weight off the seat and reach underneath the right side of the Chair to lift the handle up slowly with a clockwise twisting motion to allow the Chair to rise to desired height. To lower seat, lift the handle slowly with a clockwise twisting motion while seated.
ASSEMBLY STEP 9 To tilt the Chair while seated: Pull the handle outward to unlock. Push the handle inward to lock into position.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
