SAMUELS / LELAND / FITCH SWIVEL OFFICE CHAIR MODEL # AXCOCHR-12
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A B BACK QTY 1 C E D MECHANISM QTY 1 ARMS QTY 2 SEAT QTY 1 F GAS LIFT QTY 1 CASTER QTY 5 G BASE QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 SHORT BOLT M6 X 20mm QTY 4 4 3 LONG BOLT M6 X 30mm QTY 4 5 WASHER M6 X 18mm QTY 8 FLAT HEAD BOLT M8 X 40mm QTY 4 6 CAP QTY 4 ALLEN KEY M6 QTY 1 7 ALLEN KEY M8 QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
ASSEMBLY STEP 1 Place the Base (G) upside down on a flat smooth surface. Attach the Casters (F) to the Base (G). Attach Gas Lift (E) to the Base (G).
ASSEMBLY STEP 2 Place the Seat (B) on its back on a flat smooth surface. Attach the Mechanism (D) to the bottom of the Seat (B) with four Short Bolts (1) and four Washers (4). Use Allen Key (6) to tighten.
ASSEMBLY STEP 3 Attach the metal plate on Back (A) to the Mechanism (D) with four Long Bolts (2) and four Washers (4). Use Allen Key (6) to tighten approximately 20%.
ASSEMBLY STEP 4 Attach the Arms (C) to the Back (A) and Seat (B) using two Flat Head Bolts (2) on each Arm (C). Use Allen Key (7) to tighten.
ASSEMBLY STEP 5 Place the Seat (B) on its back on a flat smooth surface. Use Allen Key (6) to fully tighten.
ASSEMBLY STEP 6 Place the Seat (B) right side up the Gas Lift (E).
ASSEMBLY STEP 7 Place two Bolt Caps (5) on each Arm (C).
ASSEMBLY STEP 8 The tension knob is located under the seat cushion. Turn the knob clockwise to tighten the tilt mechanism. Turn the knob counter-clockwise to loosen the tilt mechanism.
ASSEMBLY STEP 9 To raise the seat, lift your weight off the seat and reach underneath the right side of the Chair to lift the handle up slowly with a clockwise twisting motion to allow the Chair to rise to desired height. To lower seat, lift the handle slowly with a clockwise twisting motion while seated.
ASSEMBLY STEP 10 To tilt the Chair while seated: Pull the handle outward to unlock. Push the handle inward to lock into position.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
