Specification

AXCMALW-G Malden Bentwood Dining Chair
P a g e
5
|
9
V. Packaging:
Packaging must pass ISTA 3A testing by Approved Labs.
A. Hardware package:
Each type of hardware should be packed separately in a zip-bag
;
Hardware Red Strings-
used to identify the hardware inside the box –must be attached to the
hardware bag at one end, and the other end must be attached to the outside of the box.
B. Carton box:
- Trapezoid shape carton design.
- Carton: Double-wall (5 Ply) Corrugated; Burst strength: Minimum of 275lb/in
2
.
C. Packaging instruction:
- Product should be dried completely before packaging.
- Product should be cleaned completely before packaging. Any dust, stains… are not allowed on any
surface.
- All parts should be tightly bundled in order to make sure they can not be moved during transit.
- All parts wrapped by foam sheet. Foam sheets must cover all surfaces to avoid damage of parts
during transit.