Installation Guide

Table Of Contents
/2710
STEP-3
ASSEMBLY
MODEL # AXCLRY-12DCB
R
PL
PR
O
O
R
PR
PL
Q
45
1. Slide Drawer Bottom R firmly into slots on Drawer Sides PL ,PR and Drawer Front O .
2. Align Drawer Back Q with Drawer Bottom R and press firmly into slot .
3. Attach Drawer Back using two Phillip Screws 4 through guide holes on each
Drawer Side
PL , PR .
4. Use Allen Key 5 to tighten Screws. Do not over-tighten.