Installation Guide

ASSEMBLY
STEP 7
12/13
MODEL # AXCKIT06-WH
1. Insert assembled drawers into slots on assembled table.
2. Drawers can be inserted into either side of table opening.
STEP 8
1. Insert 2 Dowels 5 into top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align guide holes on bottom corners of Top A with Dowels 5 in Sides BL , BR .
4. Use Allen Key Screw 1 attach Top A to Sides BL , BR and to Divider E .
5. Use Allen key 3 to tighten Allen key Screw. Do not over-tighten .
A
E
D
BL
BR
5
3
1
1
3
F
ro
n
t
/
Av
a
n
t
Fro
nt /
Avant