SIMP HOME I ® I L I F E B Y D E S I GN ARTISAN / HOLDEN / STRATFORD 72 INCH WIDE TV MEDIA STAND MODEL # AXCHOL005-72BL 1/25
SIMP HOME I I ® L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72BL PARTS DESCRIPTION A B C Fron t/A van t Fron t/A van t BOTTOM SHELF QTY 1 TOP QTY 1 DL DR LEFT BACK PANEL QTY 1 Warning Label BOTTOM BACK PANEL QTY 1 D1 RIGHT BACK PANEL QTY 1 EL D2 TOP SHELF QTY 1 TOP BACK PANEL QTY 1 ER ant / Av t n Fro Fro nt / Ava nt LEFT SIDE QTY 1 RIGHT SIDE QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72BL PARTS DESCRIPTION FL FR GL t van t/A n o Fr Fro nt / Ava nt LEFT DIVIDER QTY 1 LEFT MIDDLE DIVIDER QTY 1 RIGHT DIVIDER QTY 1 H GR t van t/A rF on I Fro nt / Ava nt Fro nt / Ava nt RIGHT MIDDLE DIVIDER QTY 1 J L K SHELF QTY 2 CENTER SHELF QTY 1 TOP DIVIDER QTY 1 LARGE DOOR (L&R Same) QTY 2 SMALL DOOR (L&R Same) QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72BL PARTS DESCRIPTION M N BOTTOM SUPPORT LEG QTY 2 PL O FLIP DOWN DOOR QTY 1 Q PR LEFT DRAWER SIDE QTY 1 DRAWER FRONT QTY 1 RIGHT DRAWER SIDE QTY 1 DRAWER BACK QTY 1 R DRAWER BOTTOM QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCHOL005-72BL HARDWARE DESCRIPTION 2 1 3 CAM LOCK PIN CAM LOCK QTY 19 SETS ALLEN KEY SCREW M6 X 30 mm QTY 43 6 5 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 39 PHILLIPS SCREW M3 X 12 mm QTY 24 8 PHILLIPS SCREW M4 X 30 mm QTY 8 SHELF SUPPORT QTY 12 MAGNET AND PLATE QTY 4 SETS 12 11 PHILLIPS SCREW M3 X 15 mm QTY 20 HANDLE M4 X 30mm QTY 6 SETS ALLEN KEY QTY 1 7 10 9 4 LATCH QTY 1 SET PHILLIPS SCREW M4 X 15 mm QTY 6 13 a.
COMPONENTS – KEY DIAGRAM MODEL # AXCHOL005-72BL D1 DR DL D2 A FR H FL Front / Ava nt GL J EL K Front / Ava nt ER C I GR Front / Ava nt Front / Ava nt Front / Ava nt L N Front / Ava nt L J Front / Ava nt K B M M Q PL R PR O 9/25
ASSEMBLY MODEL # AXCHOL005-72BL STEP 1 O PR PL 2 PR PL O 2 1. A ach 4 Cam Lock Pins 2 into pre-drilled holes at the back of Drawer Front O . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides PL , PR . 3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side PL , PR . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 R PR PL O 1. Slide Drawer Bo om R firmly into slots on Drawer Sides PL , PR and Drawer Front O .
ASSEMBLY MODEL # AXCHOL005-72BL STEP 3 Q 1 PR 3 R PL O 1. Align Drawer Back Q with Drawer Bo om R and press firmly into slot . 2. A ach back using 2 Allen Key Screws 1 through guide holes on each Side PL , PR . 3. Use Allen Key 3 to ghten screws. Do not over- ghten. STEP 4 NOTE: The screwdriver is not included in the hardware pack. 4 O 1. Use Phillips screwdriver to a ach Handle 4 to Drawer Front O .
ASSEMBLY MODEL # AXCHOL005-72BL Front / Avant Front / Avant Front / Avant STEP 5 GR I GL 1 3 1. A ach Centre Shelf I to each Middle Divider GL , GR using 3 Allen Key Screws 1 . 2. Use Allen Key 3 to ghten screws. Do not over- ghten.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 6 NOTE: The screwdriver is not included in the hardware pack. 1 3 2 2 H Front / Avant 2 Front / Avant C 2 I Front / Avant 1 2 GR GL 2 1. A ach 6 Cam Lock Pins 2 into pre-drilled holes at the bo om of Top Shelf C . 2. Align Cam Lock Pins with guide holes on Middle Divider GL , GR . 3. Insert 3 Cam Lock 2 into guide holes on each Middle Divider GL , GR . 4. Use flathead screwdriver to secure Cam Lock . 5.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 7 1 FR Front / Avant Front / Avant 3 Front / Avant C Front / Avant 1 1 Front / Avant FL 1. A ach Top Shelf C to each Divider FL , FR using 3 Allen Key Screws 1 . 2. Use Allen Key 3 to ghten screws. Do not over- ghten. STEP 8 Front / Avant GR Front / Avant Front / Avant Front / Avant GL FL Front / Avant FR 1 1 1 B 1 1 1 1 3 1. A ach Bo om Shelf B to Dividers FL , FR & GL , GR using 12 Allen Key Screws 1 (3 Allen Key Screws / each Divider ). 2.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 9 NOTE: The screwdriver is not included in the hardware pack. 2 2 2 ER B Front / Avant Front / Avant EL M M 8 1. A ach 3 Cam Lock Pins 2 into pre-drilled holes on each Side EL , ER . 2. Align Cam Lock Pins with guide holes and a ach Bo om Shelf B . 3. Insert 6 Cam Locks 2 into guide holes on Bo om Shelf B . 4. Use flathead screwdriver secure Cam Locks. 5. A ach 2 Bo om Support Legs M align with pre-drilled holes at back of Bo om Shelf B .
ASSEMBLY MODEL # AXCHOL005-72BL STEP 10 EL 2 H FL A 2 Front / Avant Front / Avant FR ER 2 1 1 ER 3 H 1 FR A 3 Front / Avant EL Front / Avant FL 1. A ach 3 Cam Lock Pins 2 into pre-drilled holes at the bo om of Top A ( at center ) . 2. Align Cam Lock Pins with guide holes on Top Divider H . 3. Insert 3 Cam Locks 2 into guide holes on Top Divider H . 4. Use flathead screwdriver to secure Cam Locks. 5.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 11 Note: The back of the tv frame does not have pre-drilled holes to a ach the back panels. NOTE: The screwdriver is not included in the hardware pack. Warning Label A DR D1 Fro nt / Ava nt D2 DL 5 1. Use Phillips screws Round Head 5 to a ach Back Panels DL , DR , D1 , D2 through guild holes from Back Panels to the back of Cabinet. 2. Use Phillips screwdriver to ghten screws.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 12 First Step Last Step ( after adjust the door ) 9 9 9 A EL ER K FL I FR L N L K B 12 1. Attach hinges on Large Doors K to Sides EL , ER and attach hinges on Small Doors L to Dividers FL , FR using Phillips Screws 9 into pre-drill holes: - Using Phillips screwdriver to attach Screws 9 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 13 10 11 10 K GR L B K L 10 6 10 6 K L N 6 B GR L K 10 1. A ach 4 Magnet Plates 6 to bo om corner of Doors K and Doors L using Phillips Screws 10 into pre-drilled holes. 2. A ach 4 Magnets 6 using Phillips Screws 10 into pre-drilled holes on Bo om Shelf B . 3. A ach Latch 11 to Divider GR and Flip Down Door N using Screw 10 into pre-drilled holes.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 14 4 L N K L K 4 4 1. Use a Phillips screwdriver to a ach Handles 4 to Doors K , L & Flip Down Door N through guide holes.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 15 A shelf level 1 shelf support anti - tipping shelf level 2 7 shelf level 3 J J 7 J J 1. Attach 4 Shelf Supports 7 for each Shelf J in desired location . 2. 2 Shelf Supports 7 may be used on back top of each Shelf J as a tipping restraint.
ASSEMBLY MODEL # AXCHOL005-72BL STEP 16 1.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. B STEP 17 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP HOME I I ® L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.
